Products

BT-887

Click to enlarge

BiTech

RFid

GSM

Operating centre

Contact us for info
Control unit hybrid with 8 wired zones and 8 outputs (expandable to 24 IN-OUT) and 55 bidirectional wireless devices (+ 8 repeaters) with radio interface (optional BT-RX63/B). 8 Partitions. Time scheduler. Digital phone communicator (Contact-ID). 8 number set. Log with max 256 events. DTMF command. Function of Listening and Handsfree.


- DISCONTINUED -
Power supply 220-230Vac 50Hz /13,8Vcc, with transformer 25VA
Access Keys 32
Wired Proximity Readers 8
Card / Proximity tag 32
Wireless outdoor sirens 8
Radio protocol SICEP BiTech radio network (proprietary protocol) with integrated module 868MHz, 3 selectable channels
BiTech wireless devices 55 + 8 REP
Event log 256
Other optional equipment Ethernet
Modem card for remote programmation by telephone line
Voice card for messages recorded
GSM / GPRS module
N ° devices BUS485 17 + GSM
SIM Type SIM Dati M2M, SIM Voice (contract or pre-paid)
LED Signals
  • Mains
  • Power
  • Low battery
  • Receiving a valid signal
  • Tx / Rx radio 868MHz
  • GSM state
Others
  • Clock with automatic remittance summer / winter time
  • Protection on the current output terminal (self-resetting fuse)
  • Configuration panel control from PC
  • Configuration of wireless devices using the same panel control
  • Firmware upgradeable from PC
  • Programmation local or remote
Operating environment temperature from -10 ° to +55 ° C, humidity 20% to 80%
Case Protection IP30
Dimensions 31 x 30 x 9,5 cm
Key reader 8
Wired Keyboards 8
I/O Expansions add 2
Battery 12V, 7,5Ah max.
Power consumption at 230V 60mA typical, with two wired keypads connected;
70mA with two keypads connected and GSM transmission
Power consumption at 12V: 350mA with two wired keypads connected;
500mA with two keypads connected and GSM transmission
Partitions 8 independents
Configurable time of entry, exit, auto-arming. Ronda area with automatic rearm. Management of common zones with two types of arming (normal, Master)
Types of arming Two for each area: Total and Perimetral. Management Exclusion zones in Alarm, Programmable reinclusion
Scheduler 4 hours of arming/disarming for each partitions on a weekly basis
Wired zones 8 zones expandable to 24
Impedance 100KOhm, configurable NC, NO or double-balanced, immediate / delayed; Panic / Emergency / Fire, 24H, insertion area.
Outputs 8 outputs expandable to 24
Open collector to GND, 100mA max.; Static or monostable
Other outputs No.3 +12 VDC power supply for external devices; 800mA max current total
No.1 for outdoor siren, max. 70mA
No.1 for indoor siren
Siren alarm relay, exchange free NO / NC / COM, 5A
Check battery Continuous monitoring voltage
Test dynamic battery Yes, programmable 1/5/10/20/30 every day
Control voltage Check continuous of voltage
Opening the case Test continuous for opening case
Tamper Yes
Interfaces
  • BUS RS485 (4 wires) for connecting optional devices
  • Serial port for programming MVC
  • Removable terminal block
Weight 1,5Kg without battery
4Kg with battery 7,2Ah

Accesories

BT-EX8/2 Expansion module with 8 Inputs - 8 Outputs. Connection on RS485 BUS.
BT-RX63/B RF Transreceiver 868Mhz to manage 55 wireless devices + 8 repeaters in 2-Way technology. 3 selectable radio channels. Function RF jumming.
BT-GSM GSM dialer. Allows to send recorded messages, SMS text, the function of Listening and DTMF. Remote programming included.
KIT-AG918S Dualband GSM antenna kit (900Mhz/1800Mhz) with 2m cable and bracket for wall fixing
BT-LAN TCP-IP Ethernet communication module. Link with static and dynamic IP. DHCP management. 4 mail addresses set. Remote programming included.
BT-MDA Analogue modem for remote access to programming.
BT-MF Voice module for pre-recorded messages. Allows the function of Listening and Handsfree (with keypad BT-KPA).
BT-KR Electronic key reader wired.
BT-KEY Electronic high security key.
BT-KT 2-Way remote control with 5 channels. Check of the system. Acustic and visual confirmation. Information on open areas. Forced activation function. Batteries included.
BT-SKB Capacitive wired keypad "S series". With a large graphic display (128x64 pixels) and backlit capacitive buttons for clear and prompt management of Burglar Alarm. It has function keys for controlling the system. LEDs status and fault signal.

Functional characteristics:

  • Display system status and individual partitions.
  • General information of operating parameters (date / time, network presence, alarm memory, anomalies)
  • System Command (Total arming/ Partial / Shortcuts: Aid request - Supervision - Fire)
  • Local parameters programming (audio volume, brightness)
  • Tamper and tearproof
  • Multilingual (Italian, English, French, German, Spanish)
  • Full compatibility with all of the alarm control panel models (BT-436/887/15159, DCS-436/887/15159, IRS-CM/CB, UN-436)
  • Connection: Bus RS485
  • Dimensions: 160x160x28 mm
  • Weight: 160gr
BT-KPA Wired LCD keypad with blue background. Allows the recording of voice messages, Listening and Handsfree.
BT-KPE Economic wired LCD keypad with green background.
BT-SKW Capacitive two-way radio keypad "S series" with BiTech technology. With a large graphic display (128x64 pixels) and backlit capacitive buttons for clear and prompt management of Burglar Alarm. It has function keys for controlling the system. LEDs status and fault signal. It allows custom description of the zones. 3.6V lithium batteries (INCLUDED).

Functional characteristics:

  • Display system status and individual partitions.
  • General information of operating parameters (date / time, network presence, alarm memory, anomalies)
  • System Command (Total arming/ Partial / Shortcuts: Aid request - Supervision - Fire)
  • Local parameters programming (audio volume, brightness)
  • Tamper and tearproof
  • Multilingual (Italian, English, French, German, Spanish)
  • Full compatibility with all of the alarm control panel models (BT-436/887/15159, DCS-436/887/15159, IRS-CM/CB, UN-436, ONE)
  • You can manually enter a description of the individual zones, programmed in the control panel, directly from the menu, using the appropriate keys, or via the external memory chip containing all the descriptions entered via SicepConnect software
  • Power: 2 AA 3.6V lithium batteries which guarantee operation for over 2 years
  • Aerial: Integrated, Internal
  • Dimensions: 160x160x28 mm
  • Weight: 320gr, battery included
BT-KPW 2-Way wireless LCD keypad with blue background. Allows personalized description of areas. Lithium batteries 3,6V are included.
BT-PRX Wired proxi reader for indoor. 4 touch keys. It has buzzer and relay output. Reading to 10mm. Color black.
BT-PRX/WH Wired proxi reader for indoor. 4 touch keys. It has buzzer and relay output. Reading to 10mm. Color white.
BT-PRW 2-Way wireless proxi reader for indoor. 4 touch keys. Reading to 10mm. It has buzzer and relay output. Lithium batteries included. Color Black.
BT-PRW/WH 2-Way wireless proxi reader for indoor. 4 touch keys. Reading to 10mm. It has buzzer and relay output. Lithium batteries included. Color white.
BT-CARD Proxi card.
BT-TAG Proxi key tag.
BT-CME 2-Way wireless magnetic door detector. It manages another auxiliary input. Complete with tamper. Lithium batteries included. Color white.
BT-CME/B 2-Way wireless magnetic door detector. It manages another auxiliary input. Complete with tamper. Lithium batteries included. Color brown.
BT-CMW 2-Way wireless multifunctional magnetic door detector. It also manages a shock detector, the shutter and an auxiliary input. Lithium batteries included. Color white.
BT-CMW/B 2-Way wireless multifunctional magnetic door detector. It also manages a shock detector, the shutter and an auxiliary input. Lithium batteries included. Color brown.
ACI-CINPGM5 Piezoelectric sensor for recognition of breaking glass with low absorption, it's compatible with the radio system BiTech (connectable to the auxiliary input of the BT-CME / CMW devices). This small sensor (18x18x10mm) does not need to be powered; when it is in alarm it opens the circuit for a time ranging from 2 to 30 sec. based on the received stress. Coverage area is 2m of glass. It comes complete with cable (2-pole, 2m). Installation with adhesive. Material ABS, color white.
ACI-CINPGM5MA Piezoelectric sensor for recognition of breaking glass with low absorption, it's compatible with the radio system BiTech (connectable to the auxiliary input of the BT-CME / CMW devices). This small sensor (18x18x10mm) does not need to be powered; when it is in alarm it opens the circuit for a time ranging from 2 to 30 sec. based on the received stress. Coverage area is 2m of glass. It comes complete with cable (2-pole, 2m). Installation with adhesive. Material ABS, color brown.
ACI-CINEM5 Piezoelectric seismic sensor for surface with low absorption, it's compatible with the radio system BiTech (connectable to the auxiliary input of the BT-CME / CMW devices). This small sensor (18x18x10mm) does not need to be powered; when it is in alarm it opens the circuit for a time ranging from 2 to 30 sec. based on the received stress. Coverage area is 2m of glass. It comes complete with cable (2-pole, 2m). Installation with adhesive. Material ABS, color white.
ACI-CINEM5MA Piezoelectric seismic sensor for surface with low absorption, it's compatible with the radio system BiTech (connectable to the auxiliary input of the BT-CME / CMW devices). This small sensor (18x18x10mm) does not need to be powered; when it is in alarm it opens the circuit for a time ranging from 2 to 30 sec. based on the received stress. Coverage area is 2m of glass. It comes complete with cable (2-pole, 2m). Installation with adhesive. Material ABS, color brown.
ACI-CINEM046 Piezoelectric seismic sensor surface or gratings with low absorption, it's compatible with the radio system BiTech (connectable to the auxiliary input of the BT-CME / CMW devices). This small sensor (74x18x18mm) does not need to be powered; when it is in alarm it opens the circuit for a time ranging from 2 to 30 sec. based on the received stress. Coverage area is 2m of glass. It comes complete with cable (4-pole, 2m). Installation with screws or clamps. Material alluminium IP65.
BT-IRW/2 2-Way wireless PIR motion detector. Range 15mt. 90°. No reset. Replaceable lens. Lithium batteries included.
BT-IRE2.01 2-Way wireless outdoor motion PIR detector. Range 12m. 90°. Multiple beam technology. Wall mounting. Lithium battery included.
BT-IRE2.02 2-Way wireless outdoor motion PIR barrier detector. Range 24m. 3° (12mt. each side). Multiple beam technology. Wall mounting. Lithium battery included.
BT-IRE2.03 2-Way wireless PIR detector for outdoor with dual beam 12m. 90° and antimask. Wall mounting with bracket. Lithium battery included.
BT-IRE2.04 2-Way wireless barrier PIR detector for outdoor with antimask. Range from 2 to 5m 5°. Flexibility of rotation 190°. Wall mounting. Lithium battery included.
BT-IRE2.05 2-Way wireless PIR detector for outdoor with curtain range. Wall mounting (ideal for windows or doors). Lithium battery included. Color white.
BT-IRE2.05B 2-Way wireless PIR detector for outdoor with curtain range. Wall mounting (ideal for windows or doors). Lithium battery included. Color brown.
BT-IRE2.06 BiTech radio barrier type TX - RX with 2/4/6/8 IR beams and height from 50cm to 3m (double optical). Maximum outdoor range is 5m. The 868MHz radio BiTech interface is inserted in a separate external box (WxDxH = 40x40x220mm) to be added to the length of the barrier. Powered by internal battery kit. IP54 black color (on request only the white profile).
Recommended for the protection of doors and windows. Immune to sunlight. Optical synchronization. Automatic aiming and alignment beams. Adjustable crossing speed. Operating mode can be set (OR - AND RANDOM, random 2-ray).
BT-IRE2.07 BiTech radio barrier type TX - RX mono IR beam with 18cm height (double optical). Maximum outdoor range is 60m. Powered by internal battery kit. Polycarbonate frame, IP65. Black color. Brackets for pole or wall. Dimensions WxDxH = 7x13x18cm.
Recommended for protection of large outdoor spaces. Optical synchronization. Disqualification from fog. Smart system for pointing and alignment beams (SMA technology). Adjustable crossing speed.
BT-IRE2.08 BiTech radio beam tower type TX - RX with 2/3/4/6 IR beams and height from 1m to 2,5m (double optical). Maximum outdoor range is 50m. Powered by internal battery kit. The barrier is housed in an anodized aluminium frame with polycarbonate front, IP65. Black color. Optional brackets for pole or wall.
Recommended for protection of large outdoor spaces. Optical synchronization. Disqualification from fog. Smart system for pointing and alignment beams (SMA technology). Optical range (180° horizontal, 20° vertical). Operating mode can be set (OR - AND RANDOM, random two or more beams).
BT-ODT.01 2-Way wireless outdoor Dual Technology detector with antimasking. Range 12mt. 90°. Multiple beam technology. Wall mounting. Lithium battery included.
BT-ODT.02 2-Way wireless outdoor Dual Technology detector. Curtain range. Range 12mt. 7,5°. Ideal for windows, doors or walls. Complete with angled bracket and spacer wall. Lithium battery included.
BT-SMK Wireless Smoke detector with integrated temperature sensor. Complete of the base for the installation. Lithium battery included.
BT-SIR 2-Way wireless outdoor siren. 4 sounds with 3 volume levels selectable. 100dB power.
Alarm for foam, over heat and shock detector. Lithium battery included.
BT-REP RF repeater for BiTech wireless devices with 2-Way technology. Powered by 230Vac with 2 rechargeable batteries (included). Function double jump.
BT-PZ Integrated siren for BT-887 and BT-15159 units.