Click to enlarge



One way

Operating centre

Contact us for info
1-Way multiprotocol radio unit, with 8 inputs (expandable to 32 IN) and 3 service channels (network, tamper and battery). Log with max 512 events. Plastic case with tamper.
Power supply 110/230Vac 50Hz / 13,8Vcc, with 4A switching power supply
Battery 12V, 7,5Ah max
Power consumption at 230V 50mA in stand-by (RX mode)
300mA in transmission at max power
Power consumption at 12V: 120mA in stand-by (RX mode)
3,5A in transmission at max power
Range frequency VHF (156÷174MHz)
UHF (430÷470MHz)
Channel spacing 12,5KHz
Radio deviation ± 1.65 Khz
Stability in frequency 2,5ppm –20 ÷ +70°C
TX power 1/5/10W programmable
Communication protocol
  • 2 SICEP proprietary protocols
  • 3 compatible protocols
Audio encodings No. 40 programmable Subtone frequencies CTCSS
No. 15 transponder tones
Input channels 8 expandable to 32
Impedance 100KOhm, configurable NC, NO or double-balanced
Other inputs No. 1 enabling input, 100Kohm impedance
Other outputs
  • No.1 BS output, Open Collector on GND, 100mA max
  • No.1 state output programmable for abnormality on the control channels
  • No.1 +12V output for powering external devices, 800mA max., protected by resettable fuse
Check battery Continuous monitoring voltage
Control voltage Check continuous of voltage
Opening the case Test continuous for opening case
Antenna cut
  • Check for removal of antenna (only for DC grounded antennas)
  • RS-485 for I/O expansions and BT-GSM
  • RS-232 for programming and update the firmware
  • USB for programming
  • Interface for PR-G1 programmer
  • Antenna connector type "N" 50 ohm
  • Removable terminal block
LED Signals Mains, low battery, TX, power
  • Calendar clock
  • Log with 512 events on non-volatile memory
  • Thermal protection on transmitter radio
  • Power supply protection on therminal board
  • Firmware updatable via PC
  • Configuration software Sicep Connect with interactive pages
Operating environment temperature Temperature from -10° to +55° C; Humidity from 20% to 80%
Case Protection IP 30
Dimensions 31 x 29 x 9,5 cm (without antenna)
Weight 1,45 Kg without battery, 4,25Kg with 7,2Ah battery
Optional kits
  • Expansions I|O
  • RTX module
  • Remote contoll


IRS-8M.V Power 230Vac, VHF, 10W power, canalization at 12,5KHz, 156÷174MHz Frequency
IRS-8M.U Power 230Vac, UHF, 10W power, canalization at 12,5KHz, 430÷470MHz Frequency


ANT-S158 5/8 omnidirectional antenna with N connector in VHF band
ANT-S455 5/8 omnidirectional antenna with N connector in UHF band
BT-EX8/2 Expansion module with 8 Inputs - 8 Outputs. Connection on RS485 BUS.
IRS-K2 Anti-theft kit with a built-in transceiver at 868MHz and a 2 channels remote control BT-KT2.
BT-KT/2 2-Way remote control with 2 channels. Acustic and visual confirmation. RF Connection throu BiTech tecnology.